The Best Way to Install a Wall Safe
When it comes to keeping your belongings safe, it is almost always best to use a wall safe. You can safely hide your personal belongings and most precious valuables in a safe and secure place that is hidden away from the site of others. If you are going to go with this method for security, then it is good to know the best way to install a wall safe.
The first things you will need to do, is find a wall in your home that is free of wires and pipes. Many people find that inside a closet is a great place as it is out of site. Since the safe will be in the wall, the back of it may protrude out a bit so be sure to put the safe towards the back end of the closet. This will allow for more room and be less conspicuous.
When you purchase the safe, you will get a template with it. You will use this to tack it to the wall so you will know where the safe will go and to make sure you will have it level when you install it. You can trace the outline of the template to the wall for precise placement. Once you have the outline done, you should put a nail into the middle of the area of the wall that you will be taking out to put the safe in. You can use the nail as leverage to pull the piece of wall out after you cut the hole out. You should cut a small hole in the wall so you can check for any plumbing or wires before you cut out the entire area.
When you start cutting the wall out, you should start at the bottom and work your way up. It is also good to keep your saw at an angle so that you will avoid going all the way through the wall. After you get the bottom done you should go up the sides and then finally the top. You can use the nail in the center to pull the cut piece out. Next, you will need to put the safe into the hole, making sure it fits snuggly. If you find that it is loose, you can tighten the safe by using some shims that can be nailed to the studs of the wall to hold them securely.
The final step is to secure the safe to the wall. You can do this by using screws to attach it to the studs in the wall. Be sure to turn off the breaker for that are before you start work to ensure you do not tap into the electricity. Some people prefer to use a drywall saw for the job, especially if they are not familiar with doing carpentry work. Installing a wall safe is simple if you follow the instructions above. Keep it simple and you will find that it is the best way for doing the job.
Derek Rogers is a freelance writer who writes for a number of UK businesses. For Underfloor and Wall Safes, he recommends Safe Security Services.
